Coating Auxiliary Agent Nonionic Polyacrylamide Npam

• Customization: Available
• CAS No.: 9003-05-8
• Formula: Conh2[CH2-CH]N
• Model NO.: NPAM
• Environmental Protection: Yes
• Type: Sewage Treatment Chemicals
• Certification: ISO
• Color: White or Light Yellow
• Appearance: Granular or Powder
• Molecular Weight: 8million-15million
• Degree of Hydrolysis: <5
• Transport Package: Bag
• Trademark: cleanwater
• Origin: China
• HS Code: 3906901000
• Production Capacity: 2000 Tons/Month

Product Description

PAM - Nonionic Polyacrylamide



Description
This product is a water- soluble high polymer.It is a kind of linear polymer with high molecular weight,low degree of hydrolysis and very strong flocculation ability.And can reduce the friction resistance between liquid.
 
Application Field
1. It is mainly used to recycle the wastewater from clay producing.
2. It can be used to centrifugalize the tailings of coal washing and filter the fine particles of iron ore.
3. It can also be used to treat industrial wastewater.


Specifications

Item	Nonionic Polyacrylamide
Appearance	White or Light Yellow Granular or Powder
Molecular Weight	8million-15million
Degree of Hydrolysis%	<5
Note: Our product can be made upon your special request.

Application Method
1. The product should be prepared for the water solution of 0.1% as concentration. It is better to use neutral and desalted water.
2. The product should be scattered evenly in the stirring water, and the dissolving can be accelerated by warming the water (below 60ºC).
3. The most economical dosage can be determined based on a preliminary test. The pH value of the water to be treated should be adjusted before the treatment.

Package and Storage
1. The solid product can be packed in inner plastic bags, and further in polypropylene woven bags with each bag containing 25Kg.The colloidal product can be packed in inner plastic bags and further in fiber plate drums with each drum containing 50Kg or 200Kg.

2. This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35ºC.
3. The solid product should be prevented from scattering on the ground because the hygroscopic powder can cause slipperiness.