Silicone Defoamer for Packing During Slurry Production

• Usage: Oil Drilling Auxiliary Agent, Water Treatment Chemicals, Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Paper Chemicals, Surfactants, Electronics Chemicals
• pH: 6.0-8.0
• Defoaming Rate (Ml/S): More Than 12
• Transport Package: IBC Tank
• Trademark: cleanwater
• Origin: China
• Model NO.: Defoamer
• HS Code: 3402900090
• Production Capacity: 2000 Tons/Month

Product Description

Organic Silicon Defoamer



Description
QT-XPJ-04 is a fatty alcohol antifoam, which is recommended for use in papermaking section. 

Charac Teristic
Application temperature range is between 25ºC to 40ºC
Antifoaming agent components do not contain NP, APEO.
The substance components of the antifoam do not contain the substances listed in the SVHC list of the REACH Regulation.

Composition
Composed of higher fatty alcohols and fatty acid derivatives.

Specification

Physical Property	Physicochemical Properties
Appearance	White or yellowish uniform liquid emulsion, without any sediment or visible mechanical impurities
Solid content	29.0±1.0
PH Value	6.0-8.0
Defoaming rate (ml/s)	>12

Note:The information above is for reference and shall not be deemed as a technical indicator.



Instructions
QT-XPJ-04 is a compound and it belongs to unstable thermodynamic. Probably this
product stratifies or has deposits after long placed and it is normal phenomenon. Stir the product evenly at 30rpm to 60rpm before using and it does not affect the performance of product. The product cannot be placed exposure for a long time, or the product maybe crust and finally the viscosity of the product increases.
This product can be used in on-line dilution with water directly. If it needs to be diluted before using, please dilute it according to the provided method. Please request the company's customer service department for the specific dilution method. The company accepts no responsibility for any loss which may be incurred by the customer as a result of incorrect usage. It is recommended to add 100ml-300ml/ ton of paper.
This product is easy to produce foam under shear force, so it is recommended to pump directly in the process of use, and it is recommended to choose the place where the defoaming agent is easy to disperse such as the white pool under the net of the paper machine, the water collecting plate under the net or the white water tank outside the machine. (note: the temperature of the addition point must be within the applicable
temperature range of the product).
The optimal adding point, adding amount, adding method and dilution ratio shall be decided by the customer according to the actual situation on site.

Package and Storage
The product is available in 200-kg plastic bucket or 1000-kg IBC . This product should be stored in cool and ventilated place. Don't near the heat source or sunlight. No exposure to rain. Keep away from flame. Don't add acid, alkali, salt and other corrosive substances to this product. Ensure the container is sealed after using. This product may freeze under 0ºC (32ºF); if this happens, stir well after defrosting the antifoam at a rate of 30 to 60 rpm. In these cases, stirring will not affect the performance of the product if carried out at the recommended speed. When stored between 10 and 30 ºCin the original unopened containers, the product has a shelf life of 6 months from the date of manufacture.